Artificial Stone: What are its Types and Applications
Artificial Stone

Artificial stone is also known as a casted stone. Artificial stone is made up of sand, cement, and organic aggregate such as crushed stone. It is quite possible for an Artificial Stone supplier to provide particular surface textures to artificial stones. Sometimes, particular pigments are used by achieving a specific color. The inculcation of pigments shall not be more than 15 percent by volume. Artificial stone can also be cast into complicated and conceivably detailed forms. Different sizes, too, can be manufactured. In addition to that, it can be reinforced to enhance strength.

Lastly, it is worth mentioning that artificial stones are cast economically yet easily.

-Mix Ratio of Artificial Stone

Typically, cement along with aggregate are mixed in the proportion of 1:3.

-When are artificial stones chosen for development projects?

Fake stone or cast stone will be utilized for development when practical and durable regular stone can’t be achieved. Various types of artificial stones, together with their ingredients or materials and applications, will be discussed briefly.

Ransom stone

Captioned stone is also named synthetic stone which its compression strength is at least 32 MPa. Ransom stone is made by mixing silica soda with cement to give a fancy and ornamental look to the floor.

Concrete block

Concrete blocks are produced for the construction of windows, sills, steps, and piers. It is encapsulated in the construction site.

Artificial marble

It is built from Portland gypsum concrete and sand utilizing either precast or cast in situ method. For the precast creation method, the casted fake marble will be taken from the mold following three days and afterward treated with fluid fluorite of magnesia arrangement at five years old days. From that point onward, the stone is washed and wrapped with paper for 24 hours and treated again with a similar arrangement, and it will be cleaned at the last stage at the time of 30 days.

In the situ construction technique, a layer of the prepared blend is placed on a canvas. Moreover, the thickness of the coating will be 1.5 mm more than the needed depth of the stone to be made. The surface of the laid layer is rubbed and then correctly polished.

Bituminous stone

Bitumen stone is produced through the impregnation of diorite and granite with refined tar. Functions of bituminous stone provide noise, wear, and dust resistance stone surface.

Victoria stone

It is a granite component as its surface is hardened through submerging the stone in silica soda for 60 days.

Leave a Reply

Your email address will not be published. Required fields are marked *